So, after completing a Ladies Jacket and Anglaise Gown for myself I had some yardage left over.
What to do!
Make 'lil bit' a outfit!!!!
So I started searching the MET, Pinterest and one of my Colonial Williamsburg books.
And I found these pictures...
 |
| Embroidered Linen Dress 18th C. Front |
 |
| Back of Embroidered Linen Dress |
 |
|
|
| Glazed Cotton Dress 18th C. |
|
|
|
|
|
After finagling the remaining pieces of fabric I was able to work out the shape needed.
What pattern did I use???
Why my 'Lil Bit', of course!!! When she woke up this morning after hugs, kisses, and some juice to start her day; she gladly obliged to my request to lay down on mommy's fabric. I simply traced her body out making sure to keep her arms straight out.
From studying and enlarging the pictures researched, several things became apparent; 1) there were no front princess or waist seams, 2) the sleeves were not separate pieces, 3) there were only side seams, a somewhat pleated side and back at the waist area.
Unfortunately, I did not have enough fabric to make all the pleats in the skirt so I simplified my dress. I cut the back a tad too wide and made a box pleat at the top neck and ended it about waist length.
I rolled the neck hem and slip stitched it down.
The front and hem are folded twice and slip stitched as well. I wanted to be able to simply un-hem the front or hem to add extra width/length if she needed it.
On the extant dress and the descriptions provided with them, no obvious closures are discussed. Since I do want to be able to let out the gown I don't want anything to permanent and I didn't want to use pins. (Too dangerous for a toddler). So I will probably be adding some type of threaded loops with ribbon to laced down and close it at center front.
With the dress 90% done I couldn't leave her with out her outerwear!
So I quickly cut a cape out of some red wool remnants.
Again, fabric was limited so the front panels are a little skinny.
The hood is lined with some white taffeta I found in my scrap bin.
The casing for the ribbon ties is bias tape, which has been stitched to the top inside selvage edge and slip stitched down.
I also used bias tape to hem the bottom.
Here's a picture of 'lil bit' running away cause she didn't want to try on the cape.....
She's quick!!
Hopefully, I can find some linen in my stash to make a bonnet and a petticoat or chemise to go with the outfit.
Then we can take a picture of it all together!!
